Slicer Settings Presets

Filter by printer, material, and quality. All presets are community-validated starting points.

Select Printer

Select Material

Select Quality

Bambu Lab A1 Mini+PLA

Standard220°C / 0.2mm

Nozzle Temp220°C

Bed Temp65°C

Layer Height0.2mm

Print Speed200mm/s

Retraction0.8mm

Retract Speed40mm/s

Cooling Fan100%

Min Layer Time8s

Brim Width0mm

Bambu PLA Basic profile. Works for most PLA brands.

Draft220°C / 0.28mm

Nozzle Temp220°C

Bed Temp65°C

Layer Height0.28mm

Print Speed250mm/s

Retraction0.8mm

Retract Speed40mm/s

Cooling Fan100%

Min Layer Time6s

Brim Width0mm

Rapid prototyping. Expect visible layer lines.

High Quality210°C / 0.12mm

Nozzle Temp210°C

Bed Temp65°C

Layer Height0.12mm

Print Speed150mm/s

Retraction0.8mm

Retract Speed35mm/s

Cooling Fan100%

Min Layer Time12s

Brim Width0mm

Display models and miniatures. Slow outer walls for clean surfaces.

Bambu Lab A1 Mini+PETG

Standard245°C / 0.2mm

Nozzle Temp245°C

Bed Temp80°C

Layer Height0.2mm

Print Speed150mm/s

Retraction0.8mm

Retract Speed35mm/s

Cooling Fan50%

Min Layer Time10s

Brim Width0mm

Reduce cooling for layer adhesion. PEI plate recommended.

Bambu Lab A1 Mini+TPU (95A)

Standard230°C / 0.2mm

Nozzle Temp230°C

Bed Temp50°C

Layer Height0.2mm

Print Speed40mm/s

Retraction1.2mm

Retract Speed25mm/s

Cooling Fan30%

Min Layer Time15s

Brim Width0mm

Slow and steady for TPU. Dry filament before printing.

Bambu Lab P1S+PLA

Standard220°C / 0.2mm

Nozzle Temp220°C

Bed Temp55°C

Layer Height0.2mm

Print Speed250mm/s

Retraction0.8mm

Retract Speed40mm/s

Cooling Fan100%

Min Layer Time8s

Brim Width0mm

Door open or top lid off for PLA to prevent heat creep.

High Quality210°C / 0.12mm

Nozzle Temp210°C

Bed Temp55°C

Layer Height0.12mm

Print Speed180mm/s

Retraction0.8mm

Retract Speed35mm/s

Cooling Fan100%

Min Layer Time12s

Brim Width0mm

Bambu Lab P1S+PETG

Standard250°C / 0.2mm

Nozzle Temp250°C

Bed Temp80°C

Layer Height0.2mm

Print Speed180mm/s

Retraction0.8mm

Retract Speed35mm/s

Cooling Fan40%

Min Layer Time10s

Brim Width0mm

Engineering plate or glue stick on textured PEI.

Bambu Lab P1S+ABS

Standard260°C / 0.2mm

Nozzle Temp260°C

Bed Temp100°C

Layer Height0.2mm

Print Speed180mm/s

Retraction0.8mm

Retract Speed35mm/s

Cooling Fan0%

Min Layer Time15s

Brim Width0mm

Preheat chamber to 35°C+. Door closed. Use brim for large parts.

Draft260°C / 0.28mm

Nozzle Temp260°C

Bed Temp100°C

Layer Height0.28mm

Print Speed200mm/s

Retraction0.8mm

Retract Speed35mm/s

Cooling Fan0%

Min Layer Time10s

Brim Width5mm

Always use brim for draft ABS. Expect some corner warping.

Bambu Lab P1S+ASA

Standard255°C / 0.2mm

Nozzle Temp255°C

Bed Temp100°C

Layer Height0.2mm

Print Speed180mm/s

Retraction0.8mm

Retract Speed35mm/s

Cooling Fan0%

Min Layer Time15s

Brim Width0mm

Like ABS but UV-resistant. Preheat chamber. For outdoor parts.

Bambu Lab P1S+TPU (95A)

Standard230°C / 0.2mm

Nozzle Temp230°C

Bed Temp50°C

Layer Height0.2mm

Print Speed45mm/s

Retraction1mm

Retract Speed25mm/s

Cooling Fan30%

Min Layer Time15s

Brim Width0mm

Disable AMS. Feed TPU directly from spool holder.

Bambu Lab X1 Carbon+PLA

Standard220°C / 0.2mm

Nozzle Temp220°C

Bed Temp55°C

Layer Height0.2mm

Print Speed250mm/s

Retraction0.8mm

Retract Speed40mm/s

Cooling Fan100%

Min Layer Time8s

Brim Width0mm

Door open / lid off for PLA. Lidar calibration on.

Bambu Lab X1 Carbon+PETG

Standard250°C / 0.2mm

Nozzle Temp250°C

Bed Temp80°C

Layer Height0.2mm

Print Speed200mm/s

Retraction0.8mm

Retract Speed35mm/s

Cooling Fan40%

Min Layer Time10s

Brim Width0mm

Bambu Lab X1 Carbon+ABS

Standard260°C / 0.2mm

Nozzle Temp260°C

Bed Temp100°C

Layer Height0.2mm

Print Speed200mm/s

Retraction0.8mm

Retract Speed35mm/s

Cooling Fan0%

Min Layer Time15s

Brim Width0mm

Preheat 10 min with bed at 100°C. Engineering plate.

Bambu Lab X1 Carbon+ASA

Standard255°C / 0.2mm

Nozzle Temp255°C

Bed Temp100°C

Layer Height0.2mm

Print Speed200mm/s

Retraction0.8mm

Retract Speed35mm/s

Cooling Fan0%

Min Layer Time15s

Brim Width0mm

Outdoor functional parts — ASA beats ABS for UV resistance.

Creality Ender-3 V3+PLA

Standard210°C / 0.2mm

Nozzle Temp210°C

Bed Temp60°C

Layer Height0.2mm

Print Speed150mm/s

Retraction1mm

Retract Speed45mm/s

Cooling Fan100%

Min Layer Time10s

Brim Width0mm

Good starting point. Reduce speed 20% for silk PLA.

Draft215°C / 0.28mm

Nozzle Temp215°C

Bed Temp60°C

Layer Height0.28mm

Print Speed180mm/s

Retraction1mm

Retract Speed45mm/s

Cooling Fan100%

Min Layer Time8s

Brim Width0mm

Bedslinger — watch for ringing at high acceleration.

High Quality200°C / 0.12mm

Nozzle Temp200°C

Bed Temp60°C

Layer Height0.12mm

Print Speed100mm/s

Retraction1mm

Retract Speed40mm/s

Cooling Fan100%

Min Layer Time15s

Brim Width0mm

Slow outer walls. Enable ironing for top surfaces.

Creality Ender-3 V3+PLA+

Standard215°C / 0.2mm

Nozzle Temp215°C

Bed Temp65°C

Layer Height0.2mm

Print Speed140mm/s

Retraction1mm

Retract Speed45mm/s

Cooling Fan100%

Min Layer Time10s

Brim Width0mm

PLA+ ~5-10°C hotter than PLA. eSun/SUNLU PLA+ validated.

Creality Ender-3 V3+PETG

Standard240°C / 0.2mm

Nozzle Temp240°C

Bed Temp80°C

Layer Height0.2mm

Print Speed80mm/s

Retraction1.2mm

Retract Speed40mm/s

Cooling Fan40%

Min Layer Time12s

Brim Width0mm

PEI spring steel recommended. Glue stick as release agent on smooth PEI.

High Quality235°C / 0.16mm

Nozzle Temp235°C

Bed Temp80°C

Layer Height0.16mm

Print Speed60mm/s

Retraction1.2mm

Retract Speed35mm/s

Cooling Fan30%

Min Layer Time15s

Brim Width0mm

Slower for optical clarity with transparent PETG.

Creality Ender-3 V3+TPU (95A)

Standard225°C / 0.2mm

Nozzle Temp225°C

Bed Temp50°C

Layer Height0.2mm

Print Speed35mm/s

Retraction1.5mm

Retract Speed20mm/s

Cooling Fan20%

Min Layer Time20s

Brim Width0mm

Direct drive handles TPU well. Disable retraction for < 90A TPU.

Anycubic Kobra 3+PLA

Standard210°C / 0.2mm

Nozzle Temp210°C

Bed Temp60°C

Layer Height0.2mm

Print Speed150mm/s

Retraction1mm

Retract Speed40mm/s

Cooling Fan100%

Min Layer Time10s

Brim Width0mm

Anycubic PLA or generic. Good out-of-box experience.

High Quality200°C / 0.12mm

Nozzle Temp200°C

Bed Temp60°C

Layer Height0.12mm

Print Speed100mm/s

Retraction1mm

Retract Speed35mm/s

Cooling Fan100%

Min Layer Time15s

Brim Width0mm

Anycubic Kobra 3+PETG

Standard240°C / 0.2mm

Nozzle Temp240°C

Bed Temp80°C

Layer Height0.2mm

Print Speed80mm/s

Retraction1.2mm

Retract Speed35mm/s

Cooling Fan40%

Min Layer Time12s

Brim Width0mm

First layer at 20 mm/s for best adhesion.

Anycubic Kobra 3+TPU (95A)

Standard225°C / 0.2mm

Nozzle Temp225°C

Bed Temp50°C

Layer Height0.2mm

Print Speed35mm/s

Retraction1.5mm

Retract Speed20mm/s

Cooling Fan20%

Min Layer Time20s

Brim Width0mm

Prusa MK4+PLA

Standard215°C / 0.2mm

Nozzle Temp215°C

Bed Temp60°C

Layer Height0.2mm

Print Speed170mm/s

Retraction0.8mm

Retract Speed35mm/s

Cooling Fan100%

Min Layer Time10s

Brim Width0mm

Prusament PLA profile. Input Shaper enabled by default.

High Quality210°C / 0.1mm

Nozzle Temp210°C

Bed Temp60°C

Layer Height0.1mm

Print Speed120mm/s

Retraction0.8mm

Retract Speed30mm/s

Cooling Fan100%

Min Layer Time15s

Brim Width0mm

0.1mm for detailed miniatures. 0.25mm nozzle for best detail.

Prusa MK4+PETG

Standard240°C / 0.2mm

Nozzle Temp240°C

Bed Temp85°C

Layer Height0.2mm

Print Speed130mm/s

Retraction0.8mm

Retract Speed30mm/s

Cooling Fan50%

Min Layer Time10s

Brim Width0mm

Prusament PETG. Smooth PEI with glue stick separator.

Prusa MK4+ABS

Standard255°C / 0.2mm

Nozzle Temp255°C

Bed Temp100°C

Layer Height0.2mm

Print Speed100mm/s

Retraction0.8mm

Retract Speed30mm/s

Cooling Fan0%

Min Layer Time15s

Brim Width5mm

MK4 not enclosed — draft shield or enclosure needed for ABS. Brim required.

Prusa MK4+ASA

Standard255°C / 0.2mm

Nozzle Temp255°C

Bed Temp100°C

Layer Height0.2mm

Print Speed100mm/s

Retraction0.8mm

Retract Speed30mm/s

Cooling Fan0%

Min Layer Time15s

Brim Width5mm

Enclosure recommended. ASA smells less than ABS. For outdoor parts.

Prusa MK4+TPU (95A)

Standard225°C / 0.2mm

Nozzle Temp225°C

Bed Temp50°C

Layer Height0.2mm

Print Speed40mm/s

Retraction0.8mm

Retract Speed25mm/s

Cooling Fan30%

Min Layer Time20s

Brim Width0mm

Nextruder handles flex well. Loosen idler slightly.

Creality K1+PLA

Standard220°C / 0.2mm

Nozzle Temp220°C

Bed Temp55°C

Layer Height0.2mm

Print Speed250mm/s

Retraction0.8mm

Retract Speed40mm/s

Cooling Fan100%

Min Layer Time8s

Brim Width0mm

Hyper PLA or generic. Door open / lid off for PLA on enclosed printer.

Draft220°C / 0.28mm

Nozzle Temp220°C

Bed Temp55°C

Layer Height0.28mm

Print Speed300mm/s

Retraction0.8mm

Retract Speed45mm/s

Cooling Fan100%

Min Layer Time6s

Brim Width0mm

Max speed test. Flow calibration recommended at this speed.

Creality K1+PETG

Standard245°C / 0.2mm

Nozzle Temp245°C

Bed Temp80°C

Layer Height0.2mm

Print Speed180mm/s

Retraction0.8mm

Retract Speed35mm/s

Cooling Fan50%

Min Layer Time10s

Brim Width0mm

Creality K1+ABS

Standard260°C / 0.2mm

Nozzle Temp260°C

Bed Temp100°C

Layer Height0.2mm

Print Speed180mm/s

Retraction0.8mm

Retract Speed35mm/s

Cooling Fan0%

Min Layer Time15s

Brim Width0mm

K1 enclosed — great for ABS. Preheat 10 min for stable chamber temp.

About These Presets

These are community-validated starting points, not one-size-fits-all final settings. Different filament brands, ambient conditions, and even unit-to-unit variation affect optimal settings. Always print a temp tower and retraction test, then fine-tune from there.

⚠️ Verify before use: filament batch and ambient conditions can shift optimal settings. Always test first.